RFC1407-MIB :: dsx3LoopbackConfig

MIB Reference — IPNetwork Monitor

All MIBsRFC1407-MIBdsx3LoopbackConfig

dsx3LoopbackConfig

Module: RFC1407-MIB

OID (symbolic): RFC1407-MIB::dsx3LoopbackConfig

OID (numeric): 1.3.6.1.2.1.10.30.5.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

This variable represents the desired loopback configuration of the DS3/E3 interface. The values mean:

dsx3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value.

dsx3PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function.

dsx3LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out.

dsx3OtherLoop Loopbacks that are not defined here.

dsx3InwardLoop The sent signal at this interface is looped back through the device.

dsx3DualLoop Both dsx1LineLoop and dsx1InwardLoop will be active simultaneously.

What is dsx3LoopbackConfig?

This object configures the desired loopback mode for a DS3/E3 interface, allowing network technicians to redirect signal flow for testing and diagnostics without affecting live traffic. Supported loopback modes include no loopback, payload loopback, line loopback, inward loopback, and dual loopback configurations, each serving different testing scenarios. The configured value may differ from the actual loopback state if the requested configuration cannot be established on the link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.30.5.1.9
snmpwalk -v2c -c public <target> RFC1407-MIB::dsx3LoopbackConfig

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.30.5.1.9.1
snmpget -v2c -c public <target> RFC1407-MIB::dsx3LoopbackConfig.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.30.5.1.9.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.2mgmtBKTEL-HFC862-BASE-MIB
1.3.6.1.2.1mib_2CHECKPOINT-MIB-2
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.30ds3DS3-MIB
1.3.6.1.2.1.10.30.5dsx3ConfigTableDS3-MIB
1.3.6.1.2.1.10.30.5.1dsx3ConfigEntryDS3-MIB
1.3.6.1.2.1.10.30.5.1.9dsx3LoopbackConfigRFC1407-MIB