All MIBs › RFC1407-MIB › dsx3LineCoding
dsx3LineCoding
Module: RFC1407-MIB
OID (symbolic): RFC1407-MIB::dsx3LineCoding
OID (numeric): 1.3.6.1.2.1.10.30.5.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length.
What is dsx3LineCoding?
This OID specifies which zero-suppression encoding method the T3/E3 circuit uses (e.g., B3ZS), affecting how the signal is transmitted. Different encodings allow different rates or line conditions. A carrier engineer would set this to match what the far end supports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.30.5.1.6 snmpwalk -v2c -c public <target> RFC1407-MIB::dsx3LineCoding
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.30.5.1.6.1 snmpget -v2c -c public <target> RFC1407-MIB::dsx3LineCoding.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.30.5.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.30 | ds3 | DS3-MIB |
| 1.3.6.1.2.1.10.30.5 | dsx3ConfigTable | DS3-MIB |
| 1.3.6.1.2.1.10.30.5.1 | dsx3ConfigEntry | DS3-MIB |
| 1.3.6.1.2.1.10.30.5.1.6 | dsx3LineCoding | RFC1407-MIB |