All MIBs › RFC1398-MIB › dot3StatsInternalMacTransmitErrors
dot3StatsInternalMacTransmitErrors
Module: RFC1398-MIB
OID (symbolic): RFC1398-MIB::dot3StatsInternalMacTransmitErrors
OID (numeric): 1.3.6.1.2.1.10.7.2.1.10
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, the dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors object.
The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted.
What is dot3StatsInternalMacTransmitErrors?
This counter reports frames on this interface that failed transmission due to an internal MAC sublayer transmit error, counted here only if not already attributed to late collisions, excessive collisions, or carrier sense errors. An admin watches it as a catch-all indicator of transmit-side hardware or driver problems on the interface. For example, a rising count on an otherwise healthy link could point to a failing network interface card.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.2.1.10 snmpwalk -v2c -c public <target> RFC1398-MIB::dot3StatsInternalMacTransmitErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.2.1.10.1 snmpget -v2c -c public <target> RFC1398-MIB::dot3StatsInternalMacTransmitErrors.1
Start monitoring vendor-neutral, standards-based EtherLike-MIB, any Ethernet-capable network device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1398-MIB::dot3StatsInternalMacTransmitErrors OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based EtherLike-MIB, any Ethernet-capable network device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.2 | dot3StatsTable | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.2.1 | dot3StatsEntry | EtherLike-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.2.1.10 | dot3StatsInternalMacTransmitErrors | RFC1398-MIB |