All MIBs › RFC1284-MIB › dot3StatsSQETestErrors
dot3StatsSQETestErrors
Module: RFC1284-MIB
OID (symbolic): RFC1284-MIB::dot3StatsSQETestErrors
OID (numeric): 1.3.6.1.2.1.10.7.2.1.6
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of [12] and its generation is described in section 7.2.4.6 of the same document.
What is dot3StatsSQETestErrors?
Counts how many times the Signal Quality Error (SQE) TEST ERROR message has been generated by the PLS sublayer for this interface. A rising count typically indicates a transceiver or heartbeat/SQE test configuration issue on legacy Ethernet hardware, prompting an admin to check the transceiver or its SQE setting. For example, a steadily increasing count on an older 10BASE-T port suggests a faulty or mismatched transceiver that needs replacing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.2.1.6 snmpwalk -v2c -c public <target> RFC1284-MIB::dot3StatsSQETestErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.2.1.6.1 snmpget -v2c -c public <target> RFC1284-MIB::dot3StatsSQETestErrors.1
Start monitoring vendor-neutral, standards-based MIB, Ethernet-equipped router/host (legacy EtherLike-MIB predecessor) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1284-MIB::dot3StatsSQETestErrors OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, Ethernet-equipped router/host (legacy EtherLike-MIB predecessor) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.2 | dot3StatsTable | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.2.1 | dot3StatsEntry | EtherLike-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.2.1.6 | dot3StatsSQETestErrors | RFC1284-MIB |