All MIBs › RFC1252-MIB › ospfVirtIfHelloInterval
ospfVirtIfHelloInterval
Module: RFC1252-MIB
OID (symbolic): RFC1252-MIB::ospfVirtIfHelloInterval
OID (numeric): 1.3.6.1.2.1.13.9.1.5
Node type: OBJECT-TYPE
Type: HelloRange
Access: read-write
Description: The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
What is ospfVirtIfHelloInterval?
The interval, in seconds, between Hello packets sent over this virtual link; must match the value configured on the virtual neighbor. Defaults to 10 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.13.9.1.5 snmpwalk -v2c -c public <target> RFC1252-MIB::ospfVirtIfHelloInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.13.9.1.5.1 snmpget -v2c -c public <target> RFC1252-MIB::ospfVirtIfHelloInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.13.9.1.5.1 s <value>
Start monitoring vendor-neutral, standards-based MIB, IP routers running OSPFv2 with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1252-MIB::ospfVirtIfHelloInterval OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IP routers running OSPFv2 from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.13 | appletalk | JETDIRECT3-MIB |
| 1.3.6.1.2.1.13.9 | atecho | MRVINREACH |
| 1.3.6.1.2.1.13.9.1 | atechoRequests | RFC1243-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.13.9.1.5 | ospfVirtIfHelloInterval | RFC1252-MIB |