All MIBs › RETIX-METROLAN-MIB › ds3LoopBack
ds3LoopBack
Module: RETIX-METROLAN-MIB
OID (symbolic): RETIX-METROLAN-MIB::ds3LoopBack
OID (numeric): 1.3.6.1.2.1.37.3.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: LoopBack Mode
What is ds3LoopBack?
Puts this DS3 interface into (or takes it out of) loopback mode, a standard technique for isolating whether a fault is local or on the far end of the circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.37.3.25 snmpwalk -v2c -c public <target> RETIX-METROLAN-MIB::ds3LoopBack
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.37.3.25.1 snmpget -v2c -c public <target> RETIX-METROLAN-MIB::ds3LoopBack.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.37.3.25.1 i <value>
Start monitoring Retix MetroLAN Ethernet bridges, legacy discontinued vendor (bridge/forwarding-database status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RETIX-METROLAN-MIB::ds3LoopBack OID value, configure state conditions and alerts, and monitor any Retix MetroLAN Ethernet bridges, legacy discontinued vendor (bridge/forwarding-database status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.37 | atmMIB | ATM-MIB |
| 1.3.6.1.2.1.37.3 | atmTCMIB | ATM-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.37.3.25 | ds3LoopBack | RETIX-METROLAN-MIB |