REPEATER-REV4-MIB :: rptrSecuritySecureState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REPEATER-REV4-MIB › rptrSecuritySecureState

rptrSecuritySecureState

Module: REPEATER-REV4-MIB

OID (symbolic): REPEATER-REV4-MIB::rptrSecuritySecureState

OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.7.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The status of source address security of the network. Ports on the network that are secure(1), can be locked in order to enable security. nonSecure(2) ports cannot be locked.

Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.

What is rptrSecuritySecureState?

Reports whether the ports on this network are currently in a state that supports security locking: secure(1) ports can have rptrSecurityLockState applied, nonSecure(2) ports cannot, and portMisMatch(3) means ports disagree.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.2
snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrSecuritySecureState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.2.1
snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrSecuritySecureState.1

Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrSecuritySecureState OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1repeaterRev4CTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1.4repeaterRev4REPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.1rptrREPEATER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.1.4.1.7rptrSaSecurityREPEATER-REV4-MIB
1.3.6.1.4.1.52.4.1.1.1.4.1.7.2rptrSecuritySecureStateREPEATER-REV4-MIB