All MIBs › REPEATER-REV4-MIB › rptrSecurityLearnState
rptrSecurityLearnState
Module: REPEATER-REV4-MIB
OID (symbolic): REPEATER-REV4-MIB::rptrSecurityLearnState
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The learn state of the network. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the ports and learning begins once again. If it is set to noLearn(2), learning stops on the port.
Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
What is rptrSecurityLearnState?
Controls whether unlocked ports on this network are actively learning new source addresses: learn(1) clears existing learned addresses and resumes learning, noLearn(2) freezes the current learned set; portMisMatch(3) is a read-only indication ports disagree.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3 snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrSecurityLearnState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3.1 snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrSecurityLearnState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rptrSecurityLearnState.1
Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrSecurityLearnState OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1 | rptr | REPEATER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7 | rptrSaSecurity | REPEATER-REV4-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3 | rptrSecurityLearnState | REPEATER-REV4-MIB |