All MIBs › REPEATER-REV4-MIB › rptrSecurityLearnMode
rptrSecurityLearnMode
Module: REPEATER-REV4-MIB
OID (symbolic): REPEATER-REV4-MIB::rptrSecurityLearnMode
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Get/Set the learn mode of the network. If set to onetime learn mode oneTime(1), each port is capable of learning two addresses and securing on both destination and source addresses once they are locked. If set to continuous learn continuous(2), all addresses are initially deleted and each port continuously replaces the existing secure source address with the latest source address it sees.
Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.
What is rptrSecurityLearnMode?
Sets the learning behavior used when ports on this network are locked: oneTime(1) lets each port learn up to two addresses and lock on both source and destination, while continuous(2) keeps replacing the secured source address with whatever it currently sees; portMisMatch(3) is a read-only indication ports disagree.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4 snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrSecurityLearnMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4.1 snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrSecurityLearnMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4.1 i <value>
Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrSecurityLearnMode OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1 | rptr | REPEATER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7 | rptrSaSecurity | REPEATER-REV4-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4 | rptrSecurityLearnMode | REPEATER-REV4-MIB |