All MIBs › REPEATER-REV4-MIB › rptrPortSecurityLockAddAddress
rptrPortSecurityLockAddAddress
Module: REPEATER-REV4-MIB
OID (symbolic): REPEATER-REV4-MIB::rptrPortSecurityLockAddAddress
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Setting a value to this object will cause a new entry to be added to the rptrPortSecurityListTable. When read this object will display an OCTET STRING of SIZE 6 with each octet containing a 0.
In general it is possible to add addresses at anytime. However there are several instances where the firmware and or hardware can not support the operation. In these instances an error will be returned if a addition is attempted.
What is rptrPortSecurityLockAddAddress?
Setting this to a 6-byte MAC address adds that address to this port's list of locked/allowed source addresses (rptrPortSecurityListTable); reads always return all-zero octets since this is a write-triggered action, and some firmware/hardware combinations may reject an addition attempt with an error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4 snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrPortSecurityLockAddAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4.1 snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrPortSecurityLockAddAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4.1 s <value>
Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrPortSecurityLockAddAddress OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3 | rptrPort | REPEATER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9 | rptrPortSecurity | REPEATER-REV4-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1 | rptrPortSecurityTable | REPEATER-REV4-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1 | rptrPortSecurityEntry | REPEATER-REV4-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4 | rptrPortSecurityLockAddAddress | REPEATER-REV4-MIB |