REPEATER-REV4-MIB :: rptrPortGrpSASecurityLearnState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REPEATER-REV4-MIB › rptrPortGrpSASecurityLearnState

rptrPortGrpSASecurityLearnState

Module: REPEATER-REV4-MIB

OID (symbolic): REPEATER-REV4-MIB::rptrPortGrpSASecurityLearnState

OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The learn state of source addressing security for this port group. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the port and learning begins once again. If it is set to noLearn(2), learning stops on the port.

Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value.

What is rptrPortGrpSASecurityLearnState?

Controls whether unlocked ports in this specific port group are actively learning new source addresses: learn(1) clears existing learned addresses and resumes learning, noLearn(2) freezes the current set; portMisMatch(3) is a read-only indication ports in the group disagree.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4
snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrPortGrpSASecurityLearnState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4.1
snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrPortGrpSASecurityLearnState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4.1 i <value>

Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrPortGrpSASecurityLearnState OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1repeaterRev4CTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1.4repeaterRev4REPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.2rptrPortGroupREPEATER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.1.4.2.6rptrPortGrpSrcAddrLockTableREPEATER-REV4-MIB
1.3.6.1.4.1.52.4.1.1.1.4.2.6.1rptrPortGrpSrcAddrLockEntryREPEATER-REV4-MIB
1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4rptrPortGrpSASecurityLearnStateREPEATER-REV4-MIB