All MIBs › REPEATER-REV4-MIB › rptrHwTrapSetSeg
rptrHwTrapSetSeg
Module: REPEATER-REV4-MIB
OID (symbolic): REPEATER-REV4-MIB::rptrHwTrapSetSeg
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables and disables segmentation traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of other(3) is not allowed.
This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of disable(1).
This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of enable(2).
This object will read with the value of other(3) if all instances of rptrPortHwTrapSetSeg for this network are not currently set to a value the same value.
What is rptrHwTrapSetSeg?
Enables or disables port-segmentation traps for every port on this network in one write — equivalent to setting each port's rptrPortHwTrapSetSeg individually; reading returns other(3) if the per-port settings currently disagree, since other(3) itself cannot be set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2 snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrHwTrapSetSeg
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2.1 snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrHwTrapSetSeg.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2.1 i <value>
Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrHwTrapSetSeg OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1 | rptr | REPEATER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6 | rptrTrap | REPEATER-REV4-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1 | rptrHwTrapSet | REPEATER-REV4-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2 | rptrHwTrapSetSeg | REPEATER-REV4-MIB |