REPEATER-MIB :: rptrPortMgmtAdminState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REPEATER-MIB › rptrPortMgmtAdminState

rptrPortMgmtAdminState

Module: REPEATER-MIB

OID (symbolic): REPEATER-MIB::rptrPortMgmtAdminState

OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this object to Enable will cause port to be enabled. Setting this object to Disable will cause the port to be disabled. When read this object will return the state of the object per the last request.

What is rptrPortMgmtAdminState?

Setting this read-write object to enable(2) administratively turns this port on; disable(1) turns it off; a read reports the state per the last request made. Admins use it to shut down a specific port for maintenance or to contain a problem device, without affecting any other port on the board or segment. This is the finest-grained on/off control in this MIB, one level more targeted than rptrPortGrpMgmtPortsEnable or rptrMgmtPortsEnable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4
snmpwalk -v2c -c public <target> REPEATER-MIB::rptrPortMgmtAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4.1
snmpget -v2c -c public <target> REPEATER-MIB::rptrPortMgmtAdminState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rptrPortMgmtAdminState.1

Start monitoring Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB::rptrPortMgmtAdminState OID value, configure state conditions and alerts, and monitor any Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1repeaterRev4CTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.1.4repeaterRev4REPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3rptrPortREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.1rptrPortMgmtTableREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.1.1rptrPortMgmtEntryREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4rptrPortMgmtAdminStateREPEATER-MIB