All MIBs › REPEATER-MIB › rptrPortGrpAlarmTrafThreshold
rptrPortGrpAlarmTrafThreshold
Module: REPEATER-MIB
OID (symbolic): REPEATER-MIB::rptrPortGrpAlarmTrafThreshold
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Get/Set packet threshold within the timebase that will cause an alarm.
What is rptrPortGrpAlarmTrafThreshold?
This read-write integer sets the packet-count threshold, within the segment's alarm timebase, that will trigger a traffic alarm on this specific port group (board). Admins tune it to the board's own normal traffic baseline, which can differ significantly from other boards on the same repeater. This lets a busy board have a higher threshold than a lightly-used one without changing the whole segment's alarm sensitivity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 snmpwalk -v2c -c public <target> REPEATER-MIB::rptrPortGrpAlarmTrafThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3.1 snmpget -v2c -c public <target> REPEATER-MIB::rptrPortGrpAlarmTrafThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3.1 i <value>
Start monitoring Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB::rptrPortGrpAlarmTrafThreshold OID value, configure state conditions and alerts, and monitor any Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.2 | rptrPortGroup | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3 | rptrPortGrpAlarmTable | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1 | rptrPortGrpAlarmEntry | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 | rptrPortGrpAlarmTrafThreshold | REPEATER-MIB |