All MIBs › REPEATER-MIB › rptrPortAlarmErrThreshold
rptrPortAlarmErrThreshold
Module: REPEATER-MIB
OID (symbolic): REPEATER-MIB::rptrPortAlarmErrThreshold
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Get/Set the percentage of errors per good packet within the timebase that will cause an alarm.
What is rptrPortAlarmErrThreshold?
This read-write integer sets the percentage of errors per good packet, within the alarm timebase, that will trigger an error alarm on this specific physical port. Admins tune it per port, since a known-marginal long cable run might warrant a higher tolerance than a short, clean patch cable elsewhere on the same board. It works together with rptrPortAlarmErrSource, which selects which specific error types are summed for this comparison.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 snmpwalk -v2c -c public <target> REPEATER-MIB::rptrPortAlarmErrThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10.1 snmpget -v2c -c public <target> REPEATER-MIB::rptrPortAlarmErrThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10.1 i <value>
Start monitoring Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB::rptrPortAlarmErrThreshold OID value, configure state conditions and alerts, and monitor any Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3 | rptrPort | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3 | rptrPortAlarmTable | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 | rptrPortAlarmEntry | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 | rptrPortAlarmErrThreshold | REPEATER-MIB |