REPEATER-MIB :: rptrPortAlarmCollThreshold

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REPEATER-MIB › rptrPortAlarmCollThreshold

rptrPortAlarmCollThreshold

Module: REPEATER-MIB

OID (symbolic): REPEATER-MIB::rptrPortAlarmCollThreshold

OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Get/Set the number of collisions per good packet within the timebase that will cause an alarm.

What is rptrPortAlarmCollThreshold?

This read-write integer sets the number of collisions per good packet, within the alarm timebase, that will trigger a collision alarm on this specific physical port. Admins tune it to that individual port's expected duplex mode and traffic level, since a shared-media port naturally tolerates more collisions than a full-duplex one. This threshold is what turns this port's raw collision counter into a per-port actionable alert.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7
snmpwalk -v2c -c public <target> REPEATER-MIB::rptrPortAlarmCollThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7.1
snmpget -v2c -c public <target> REPEATER-MIB::rptrPortAlarmCollThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rptrPortAlarmCollThreshold.1

Start monitoring Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB::rptrPortAlarmCollThreshold OID value, configure state conditions and alerts, and monitor any Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1repeaterRev4CTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.1.4repeaterRev4REPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3rptrPortREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.3rptrPortAlarmTableREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.3.1rptrPortAlarmEntryREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7rptrPortAlarmCollThresholdREPEATER-MIB