All MIBs › REPEATER-MIB › rptrPortAlarmCollPortDisable
rptrPortAlarmCollPortDisable
Module: REPEATER-MIB
OID (symbolic): REPEATER-MIB::rptrPortAlarmCollPortDisable
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set will permit a port to be disabled on a collision alarm condition. Get will show whether the port disabling is allowed or not.
What is rptrPortAlarmCollPortDisable?
This read-write enable(2)/disable(1) switch controls whether this specific port is automatically disabled when a collision alarm condition occurs on it. Admins enable it on ports where persistent collisions (e.g., from a failing NIC) should trigger automatic isolation of just that port rather than the whole board. This keeps one bad device from degrading every other port sharing the same segment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 snmpwalk -v2c -c public <target> REPEATER-MIB::rptrPortAlarmCollPortDisable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8.1 snmpget -v2c -c public <target> REPEATER-MIB::rptrPortAlarmCollPortDisable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8.1 i <value>
Start monitoring Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB::rptrPortAlarmCollPortDisable OID value, configure state conditions and alerts, and monitor any Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3 | rptrPort | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3 | rptrPortAlarmTable | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 | rptrPortAlarmEntry | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 | rptrPortAlarmCollPortDisable | REPEATER-MIB |