All MIBs › REPEATER-MIB › rptrAlarmsTrafThreshold
rptrAlarmsTrafThreshold
Module: REPEATER-MIB
OID (symbolic): REPEATER-MIB::rptrAlarmsTrafThreshold
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Get/Set packet threshold within the timebase that will cause an alarm.
What is rptrAlarmsTrafThreshold?
This read-write integer sets the packet-count threshold, within the alarm timebase configured by rptrAlarmsAlarmTimebase, that will trigger a traffic alarm on this segment when exceeded. Admins tune it based on the segment's normal baseline traffic, setting it comfortably above everyday peaks so the alarm only fires on genuine congestion or a broadcast storm. Setting it too low causes constant false alarms; too high and a real overload condition goes unnoticed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 snmpwalk -v2c -c public <target> REPEATER-MIB::rptrAlarmsTrafThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2.1 snmpget -v2c -c public <target> REPEATER-MIB::rptrAlarmsTrafThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2.1 i <value>
Start monitoring Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB::rptrAlarmsTrafThreshold OID value, configure state conditions and alerts, and monitor any Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1 | rptr | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3 | rptrAlarms | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 | rptrAlarmsTrafThreshold | REPEATER-MIB |