All MIBs › REPEATER-MIB › rptrAlarmsErrThreshold
rptrAlarmsErrThreshold
Module: REPEATER-MIB
OID (symbolic): REPEATER-MIB::rptrAlarmsErrThreshold
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Get/Set the percentage of errors per good packet within the timebase that will cause an alarm.
What is rptrAlarmsErrThreshold?
This read-write integer sets the percentage of errors per good packet, within the configured alarm timebase, that will trigger an error alarm on this segment. Admins tune it to the segment's tolerance for noise, low for a critical, low-traffic management segment and higher for a busy segment where a small error percentage is expected background noise. It works together with rptrAlarmsErrSource, which selects exactly which kinds of errors are summed to compare against this percentage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 snmpwalk -v2c -c public <target> REPEATER-MIB::rptrAlarmsErrThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6.1 snmpget -v2c -c public <target> REPEATER-MIB::rptrAlarmsErrThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6.1 i <value>
Start monitoring Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-MIB::rptrAlarmsErrThreshold OID value, configure state conditions and alerts, and monitor any Ethernet repeater/hub, Cabletron repeater hardware (per-port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1 | rptr | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3 | rptrAlarms | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 | rptrAlarmsErrThreshold | REPEATER-MIB |