All MIBs › REDLINE-AN50-PMP-V1-MIB › an50pmpLinkMaxULBurstRate
an50pmpLinkMaxULBurstRate
Module: REDLINE-AN50-PMP-V1-MIB
OID (symbolic): REDLINE-AN50-PMP-V1-MIB::an50pmpLinkMaxULBurstRate
OID (numeric): 1.3.6.1.4.1.10728.2.51.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Maximum uplink rate for this link. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
What is an50pmpLinkMaxULBurstRate?
Sets the maximum uplink burst rate for this link as a code 1-8, corresponding to 6 through 54 Mb/s, the uplink counterpart to an50pmpLinkMaxDLBurstRate. An admin tunes this to cap or raise the subscriber's upload burst rate based on link quality and service plan.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10728.2.51.1.1.6 snmpwalk -v2c -c public <target> REDLINE-AN50-PMP-V1-MIB::an50pmpLinkMaxULBurstRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10728.2.51.1.1.6.1 snmpget -v2c -c public <target> REDLINE-AN50-PMP-V1-MIB::an50pmpLinkMaxULBurstRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10728.2.51.1.1.6.1 i <value>
Start monitoring Redline AN50 WiMAX base station, point-to-multipoint, V1 processor (subscriber link status/bandwidth) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDLINE-AN50-PMP-V1-MIB::an50pmpLinkMaxULBurstRate OID value, configure state conditions and alerts, and monitor any Redline AN50 WiMAX base station, point-to-multipoint, V1 processor (subscriber link status/bandwidth) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10728 | redline | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2 | redlineMgmt | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2.51 | redlineAN50PMPV1 | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2.51.1 | an50pmpLinkTable | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2.51.1.1 | an50pmpLinkEntry | REDLINE-AN50-PMP-V1-MIB |
| 1.3.6.1.4.1.10728.2.51.1.1.6 | an50pmpLinkMaxULBurstRate | REDLINE-AN50-PMP-V1-MIB |