All MIBs › RC7586-MIB › waveguideSwitch
waveguideSwitch
Module: RC7586-MIB
OID (symbolic): RC7586-MIB::waveguideSwitch
OID (numeric): 1.3.6.1.4.1.23304.2.2.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets Waveguide switch Rx+Tx, Rx/Tx and Tx Only.
What is waveguideSwitch?
Controls which RF paths the physical waveguide switch routes: both Rx and Tx together, Rx separate from Tx, or Tx only. Used when configuring the antenna feed path for a given redundancy or maintenance scenario.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.2.2.3.1.3 snmpwalk -v2c -c public <target> RC7586-MIB::waveguideSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.2.2.3.1.3.1 snmpget -v2c -c public <target> RC7586-MIB::waveguideSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.23304.2.2.3.1.3.1 i <value>
Start monitoring Codan RC7586 satellite/HF radio modem (RF front-end/reference-clock status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RC7586-MIB::waveguideSwitch OID value, configure state conditions and alerts, and monitor any Codan RC7586 satellite/HF radio modem (RF front-end/reference-clock status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.23304 | codanGroup | CODAN-SMI |
| 1.3.6.1.4.1.23304.2 | satcomMibs | CODAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.23304.2.2 | rc7586MIB | RC7586-MIB |
| 1.3.6.1.4.1.23304.2.2.3 | ctrl | RC7586-MIB |
| 1.3.6.1.4.1.23304.2.2.3.1 | settings | RC7586-MIB |
| 1.3.6.1.4.1.23304.2.2.3.1.3 | waveguideSwitch | RC7586-MIB |