All MIBs › RC7586-MIB › buc2Protocol

buc2Protocol

OID (symbolic): RC7586-MIB::buc2Protocol

OID (numeric): 1.3.6.1.4.1.23304.2.2.2.1.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Sets/Gets packet protocol 0 - ASCII, 1 - CODAN, 2 - SAbus, 3 - Comstream, 4 - NDSatcom. Respond -1 if buc2 not connected.

What is buc2Protocol?

Selects the serial packet protocol BUC 2 uses for monitor-and-control communication: ASCII, CODAN, SAbus, Comstream, or NDSatcom. Reads -1 if BUC 2 isn't connected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.2.2.2.1.2.1
snmpwalk -v2c -c public <target> RC7586-MIB::buc2Protocol

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.2.2.2.1.2.1.1
snmpget -v2c -c public <target> RC7586-MIB::buc2Protocol.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.23304.2.2.2.1.2.1.1 i <value>

Start monitoring Codan RC7586 satellite/HF radio modem (RF front-end/reference-clock status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RC7586-MIB::buc2Protocol OID value, configure state conditions and alerts, and monitor any Codan RC7586 satellite/HF radio modem (RF front-end/reference-clock status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.23304	codanGroup	CODAN-SMI
1.3.6.1.4.1.23304.2	satcomMibs	CODAN-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.23304.2.2	rc7586MIB	RC7586-MIB
1.3.6.1.4.1.23304.2.2.2	buc2	RC7586-MIB
1.3.6.1.4.1.23304.2.2.2.1	buc2Configuration	RC7586-MIB
1.3.6.1.4.1.23304.2.2.2.1.2	buc2PktProtocol	RC7586-MIB
1.3.6.1.4.1.23304.2.2.2.1.2.1	buc2Protocol	RC7586-MIB

RC7586-MIB :: buc2Protocol

buc2Protocol

Module

This MIB depends on