buc2Faults

OID (symbolic): RC7586-MIB::buc2Faults

OID (numeric): 1.3.6.1.4.1.23304.2.2.2.2.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Gets the current fault status. Format - Bit0 PA fault, Bit1 Fan fault, Bit2 Power fault, Bit3 Temp fault, Bit4 10MHz fault, Bit5 Internal fault Bit6 LNB fault, Bit7 Red'cy Cont fault. Respond -1 if buc2 not connected.

What is buc2Faults?

Reports BUC 2's active fault bitmask, with individual bits flagging PA, fan, power, temperature, 10MHz reference, internal, LNB, and redundancy-controller faults, letting an admin decode exactly which subsystem tripped. Reads -1 if BUC 2 isn't connected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.2.2.2.2.4
snmpwalk -v2c -c public <target> RC7586-MIB::buc2Faults

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.2.2.2.2.4.1
snmpget -v2c -c public <target> RC7586-MIB::buc2Faults.1

Start monitoring Codan RC7586 satellite/HF radio modem (RF front-end/reference-clock status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RC7586-MIB::buc2Faults OID value, configure state conditions and alerts, and monitor any Codan RC7586 satellite/HF radio modem (RF front-end/reference-clock status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.23304	codanGroup	CODAN-SMI
1.3.6.1.4.1.23304.2	satcomMibs	CODAN-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.23304.2.2	rc7586MIB	RC7586-MIB
1.3.6.1.4.1.23304.2.2.2	buc2	RC7586-MIB
1.3.6.1.4.1.23304.2.2.2.2	buc2Status	RC7586-MIB
1.3.6.1.4.1.23304.2.2.2.2.4	buc2Faults	RC7586-MIB

RC7586-MIB :: buc2Faults

buc2Faults

Module

This MIB depends on