All MIBs › RBN-IPPOOL-MIB › rbnIpPoolContextThresholdPercentage
rbnIpPoolContextThresholdPercentage
Module: RBN-IPPOOL-MIB
OID (symbolic): RBN-IPPOOL-MIB::rbnIpPoolContextThresholdPercentage
OID (numeric): 1.3.6.1.4.1.2352.2.15.1.2.7.1.2
Node type: OBJECT-TYPE
Type: RbnPercentage
Access: read-only
Description: A threshold for the percentage of the number of currently available IP Pool addresses against the total number of IP Pool addresses configured within the context.
This is a falling threshold, so an SNMP trap and/or log message will only be sent when the current value, which is the % of rbnIpPoolContextAvailable/rbnIpPoolContextTotalSize truncated to a whole number in percentage, is less than or equal to this threshold, and the percentage value at the last check was greater than this threshold.
Additionally, the action of sending the SNMP trap and/or logging a message is subject to the values of rbnIpPoolContextThresholdSendTrap and rbnIpPoolContextThresholdLogMessage.
What is rbnIpPoolContextThresholdPercentage?
Falling percentage threshold (1-100) on the ratio of rbnIpPoolContextAvailable to rbnIpPoolContextTotalSize; a trap/log fires when that percentage drops to or below this value after previously being above it, e.g. warning when a context's pools collectively fall below 10% free.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2352.2.15.1.2.7.1.2 snmpwalk -v2c -c public <target> RBN-IPPOOL-MIB::rbnIpPoolContextThresholdPercentage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2352.2.15.1.2.7.1.2.1 snmpget -v2c -c public <target> RBN-IPPOOL-MIB::rbnIpPoolContextThresholdPercentage.1
Start monitoring Ericsson (Redback) SmartEdge BRAS/edge router (subscriber IP address pool utilization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RBN-IPPOOL-MIB::rbnIpPoolContextThresholdPercentage OID value, configure state conditions and alerts, and monitor any Ericsson (Redback) SmartEdge BRAS/edge router (subscriber IP address pool utilization) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2352.2.15 | rbnIpPoolMib | RBN-IPPOOL-MIB |
| 1.3.6.1.4.1.2352.2.15.1 | rbnIpPoolMIBObjects | RBN-IPPOOL-MIB |
| 1.3.6.1.4.1.2352.2.15.1.2 | rbnIpPoolSummary | RBN-IPPOOL-MIB |
| 1.3.6.1.4.1.2352.2.15.1.2.7 | rbnIpPoolContextThresholdPercentTable | RBN-IPPOOL-MIB |
| 1.3.6.1.4.1.2352.2.15.1.2.7.1 | rbnIpPoolContextThresholdPercentEntry | RBN-IPPOOL-MIB |
| 1.3.6.1.4.1.2352.2.15.1.2.7.1.2 | rbnIpPoolContextThresholdPercentage | RBN-IPPOOL-MIB |