All MIBs › RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB › raisecomRemotePortLinkUpDownTrapEnable
raisecomRemotePortLinkUpDownTrapEnable
Module: RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
OID (symbolic): RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortLinkUpDownTrapEnable
OID (numeric): 1.3.6.1.4.1.8886.1.13.1.19.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether linkUp/linkDown traps should be generated for this interface.
By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
What is raisecomRemotePortLinkUpDownTrapEnable?
Controls whether the remote device generates linkUp/linkDown SNMP traps for this interface. An admin typically leaves this enabled(1) on customer-facing ports so link flaps get reported, and may disable(2) it on sub-interfaces stacked over another interface to cut down on redundant trap noise.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.19.1.25 snmpwalk -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortLinkUpDownTrapEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.19.1.25.1 snmpget -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortLinkUpDownTrapEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.1.13.1.19.1.25.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> raisecomRemotePortLinkUpDownTrapEnable.1
Start monitoring RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortLinkUpDownTrapEnable OID value, configure state conditions and alerts, and monitor any RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.1 | raisecomAgent | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.1.13 | raisecomRemoteManagementRemote | RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB |
| 1.3.6.1.4.1.8886.1.13.1 | raisecomRemoteManagementRemoteHideMibObjects | RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB |
| 1.3.6.1.4.1.8886.1.13.1.19 | raisecomRemotePortStatsTable | RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB |
| 1.3.6.1.4.1.8886.1.13.1.19.1 | raisecomRemotePortStatsEntry | RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB |
| 1.3.6.1.4.1.8886.1.13.1.19.1.25 | raisecomRemotePortLinkUpDownTrapEnable | RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB |