RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB :: raisecomRemotePortHighSpeed

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB › raisecomRemotePortHighSpeed

raisecomRemotePortHighSpeed

Module: RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB

OID (symbolic): RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortHighSpeed

OID (numeric): 1.3.6.1.4.1.8886.1.13.1.19.1.26

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in

bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

What is raisecomRemotePortHighSpeed?

An estimate of this interface's current bandwidth in Mbps (millions of bits/sec), the same convention as the standard IF-MIB ifHighSpeed object -- e.g. a value of 1000 indicates a gigabit link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.19.1.26
snmpwalk -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortHighSpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.19.1.26.1
snmpget -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortHighSpeed.1

Start monitoring RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortHighSpeed OID value, configure state conditions and alerts, and monitor any RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.1raisecomAgentRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.1.13raisecomRemoteManagementRemoteRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1raisecomRemoteManagementRemoteHideMibObjectsRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1.19raisecomRemotePortStatsTableRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1.19.1raisecomRemotePortStatsEntryRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1.19.1.26raisecomRemotePortHighSpeedRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB