RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB :: raisecomRemotePortFaultPassPorts

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB › raisecomRemotePortFaultPassPorts

raisecomRemotePortFaultPassPorts

Module: RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB

OID (symbolic): RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortFaultPassPorts

OID (numeric): 1.3.6.1.4.1.8886.1.13.1.18.1.14

Node type: OBJECT-TYPE

Type: PortList

Access: read-write

Description: The ports set which should be down when fault pass occurs.If the value is 0,stands for fault pass function is disable on this port,otherwise fault pass function is enable and the ports set specifies which ports should be down when fault pass occurs.

What is raisecomRemotePortFaultPassPorts?

The set of ports that should be forced down when fault pass triggers on this port; a value of 0 means fault pass is effectively disabled here, while a non-zero bitmap lists which companion ports get shut when a fault is detected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.18.1.14
snmpwalk -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortFaultPassPorts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.18.1.14.1
snmpget -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortFaultPassPorts.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.1.13.1.18.1.14.1 s <value>

Start monitoring RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortFaultPassPorts OID value, configure state conditions and alerts, and monitor any RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.1raisecomAgentRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.1.13raisecomRemoteManagementRemoteRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1raisecomRemoteManagementRemoteHideMibObjectsRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1.18raisecomRemotePortTableRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1.18.1raisecomRemotePortEntryRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1.18.1.14raisecomRemotePortFaultPassPortsRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB