RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB :: raisecomRemoteL3VidUntaggedPorts

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB › raisecomRemoteL3VidUntaggedPorts

raisecomRemoteL3VidUntaggedPorts

Module: RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB

OID (symbolic): RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemoteL3VidUntaggedPorts

OID (numeric): 1.3.6.1.4.1.8886.1.13.1.16

Node type: OBJECT-TYPE

Type: PortList

Access: read-only

Description: The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.

What is raisecomRemoteL3VidUntaggedPorts?

A bitmap of the remote device's ports that transmit the management VLAN's traffic untagged on egress. For the default VLAN this typically includes all ports; on other VLANs it's device-specific and a set that conflicts with the hardware's tagging capability will be rejected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.16
snmpwalk -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemoteL3VidUntaggedPorts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.13.1.16.1
snmpget -v2c -c public <target> RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemoteL3VidUntaggedPorts.1

Start monitoring RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemoteL3VidUntaggedPorts OID value, configure state conditions and alerts, and monitor any RAISECOM TECH remotely-managed access equipment (EOC/PON remote unit telemetry) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.1raisecomAgentRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.1.13raisecomRemoteManagementRemoteRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1raisecomRemoteManagementRemoteHideMibObjectsRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
1.3.6.1.4.1.8886.1.13.1.16raisecomRemoteL3VidUntaggedPortsRAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB