All MIBs › RAISECOM-RELAY-MIB › rcRelayTransparentEnable
rcRelayTransparentEnable
Module: RAISECOM-RELAY-MIB
OID (symbolic): RAISECOM-RELAY-MIB::rcRelayTransparentEnable
OID (numeric): 1.3.6.1.4.1.8886.6.1.35.1.3
Node type: OBJECT-TYPE
Type: EnableVar
Access: read-write
Description: Specifies the status of BPDU relay transparent.1:enable,2:disable
What is rcRelayTransparentEnable?
rcRelayTransparentEnable specifies whether transparent relay of BPDUs (Bridge Protocol Data Units) is enabled or disabled, per the MIB's own note that 1 means enable and 2 means disable. Admins toggle this to control whether spanning-tree and similar Layer 2 control frames are transparently passed through the device rather than processed locally, which matters when the device sits inside a Layer 2 tunnel between two customer sites. For example, setting rcRelayTransparentEnable to 1 (enable) lets a customer's spanning-tree BPDUs pass through the relay untouched to the far end of the tunnel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.1.3 snmpwalk -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayTransparentEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.1.3.1 snmpget -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayTransparentEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.35.1.3.1 s <value>
Start monitoring Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-RELAY-MIB::rcRelayTransparentEnable OID value, configure state conditions and alerts, and monitor any Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.35 | rcRelay | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.1 | rcRelayGrobal | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.1.3 | rcRelayTransparentEnable | RAISECOM-RELAY-MIB |