RAISECOM-RELAY-MIB :: rcRelayProtocolType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAISECOM-RELAY-MIB › rcRelayProtocolType

rcRelayProtocolType

Module: RAISECOM-RELAY-MIB

OID (symbolic): RAISECOM-RELAY-MIB::rcRelayProtocolType

OID (numeric): 1.3.6.1.4.1.8886.6.1.35.2.1.1

Node type: OBJECT-TYPE

Type: Bits

Access: read-write

Description: Indicates tunneled protocol of the interface.

If a BIT is set, then the value of the corresponding protocol is tunneled.

What is rcRelayProtocolType?

rcRelayProtocolType is a bitmask indicating which Layer 2 control protocols (such as stp, dot1x, lacp, gmrp, gvrp, cdp, vtp, pvst, or lldp) are tunneled on a given interface; a set bit means that protocol's PDUs are tunneled. Admins configure this per-interface to select exactly which control protocols should be relayed transparently across the provider network rather than terminated locally. For example, setting both the stp(0) and lldp(8) bits tunnels spanning-tree and LLDP frames on that interface while leaving other protocols like cdp(5) to be processed locally.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.2.1.1
snmpwalk -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayProtocolType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.2.1.1.1
snmpget -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayProtocolType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.35.2.1.1.1 s <value>

Start monitoring Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-RELAY-MIB::rcRelayProtocolType OID value, configure state conditions and alerts, and monitor any Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.35rcRelayRAISECOM-RELAY-MIB
1.3.6.1.4.1.8886.6.1.35.2rcRelayProtocolTableRAISECOM-RELAY-MIB
1.3.6.1.4.1.8886.6.1.35.2.1rcRelayProtocolEntryRAISECOM-RELAY-MIB
1.3.6.1.4.1.8886.6.1.35.2.1.1rcRelayProtocolTypeRAISECOM-RELAY-MIB