All MIBs › RAISECOM-RELAY-MIB › rcRelayProtocolTunnelType
rcRelayProtocolTunnelType
Module: RAISECOM-RELAY-MIB
OID (symbolic): RAISECOM-RELAY-MIB::rcRelayProtocolTunnelType
OID (numeric): 1.3.6.1.4.1.8886.6.1.35.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The tunnel type used by RELAY.
What is rcRelayProtocolTunnelType?
rcRelayProtocolTunnelType specifies the tunnel encapsulation type used by RELAY for an interface, one of none, mac, or mpls. Admins choose this based on the provider network's transport: mac tunneling wraps PDUs with a special destination MAC, while mpls tunneling instead uses an MPLS VLAN label to carry them. For example, an admin on an MPLS-based backbone would set rcRelayProtocolTunnelType to mpls(2) so tunneled PDUs use the rcRelayProtocolMplsVlan setting instead of the MAC-based scheme.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.2.1.5 snmpwalk -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayProtocolTunnelType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.2.1.5.1 snmpget -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayProtocolTunnelType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.35.2.1.5.1 i <value>
Start monitoring Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-RELAY-MIB::rcRelayProtocolTunnelType OID value, configure state conditions and alerts, and monitor any Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.35 | rcRelay | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.2 | rcRelayProtocolTable | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.2.1 | rcRelayProtocolEntry | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.2.1.5 | rcRelayProtocolTunnelType | RAISECOM-RELAY-MIB |