All MIBs › RAISECOM-RELAY-MIB › rcRelayDropThreshold
rcRelayDropThreshold
Module: RAISECOM-RELAY-MIB
OID (symbolic): RAISECOM-RELAY-MIB::rcRelayDropThreshold
OID (numeric): 1.3.6.1.4.1.8886.6.1.35.3.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The drop threshold on an interface for a given protocol. After reaching this drop threshold, the interface will start dropping PDUs for the given protocol. This value cannot be greater than the value of rcRelayShutdownThreshold. A value of 0 indicates that no limit is set.
What is rcRelayDropThreshold?
rcRelayDropThreshold sets the rate, in PDUs per second (0 to 4096), at which an interface starts dropping tunneled PDUs for a given protocol, with 0 meaning no limit and the value capped by rcRelayShutdownThreshold. Admins tune this to rate-limit tunneled control-plane traffic and protect the device from being overwhelmed by excessive BPDU or similar protocol floods on a given interface. For example, setting rcRelayDropThreshold to 100 PDUs/sec means the interface begins discarding that protocol's tunneled frames once the rate exceeds 100 per second.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.3.1.2 snmpwalk -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayDropThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.35.3.1.2.1 snmpget -v2c -c public <target> RAISECOM-RELAY-MIB::rcRelayDropThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.35.3.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rcRelayDropThreshold.1
Start monitoring Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-RELAY-MIB::rcRelayDropThreshold OID value, configure state conditions and alerts, and monitor any Raisecom switch, access/aggregation device (relay/dry-contact alarm outputs) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.35 | rcRelay | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.3 | rcRelayThresholdTable | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.3.1 | rcRelayThresholdEntry | RAISECOM-RELAY-MIB |
| 1.3.6.1.4.1.8886.6.1.35.3.1.2 | rcRelayDropThreshold | RAISECOM-RELAY-MIB |