RAISECOM-LINKAGGREGATION-MIB :: rcLinkAggregationTicketGenerationAlgorithm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAISECOM-LINKAGGREGATION-MIB › rcLinkAggregationTicketGenerationAlgorithm

rcLinkAggregationTicketGenerationAlgorithm

Module: RAISECOM-LINKAGGREGATION-MIB

OID (symbolic): RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationTicketGenerationAlgorithm

OID (numeric): 1.3.6.1.4.1.8886.6.1.6.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: There are two algorithm to generate trunk ticket: direct-map and crc. Direct-map uses the last two bits of mac address as the trunk ticket; Crc uses crc algorithm on all mac address to generate trunk ticket.

What is rcLinkAggregationTicketGenerationAlgorithm?

This object selects the algorithm, direct-map or crc, used to generate the trunk 'ticket' that determines load distribution, with direct-map using the last two bits of the MAC address and crc running a CRC algorithm over the whole MAC address. Admins may switch to crc(2) for more even distribution across aggregated links when direct-map produces uneven traffic hashing for their MAC address population. Setting this to crc(2) changes the trunk ticket generation from the simple two-bit direct-map default to a full CRC-based computation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.6.3
snmpwalk -v2c -c public <target> RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationTicketGenerationAlgorithm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.6.3.1
snmpget -v2c -c public <target> RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationTicketGenerationAlgorithm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.6.3.1 i <value>

Start monitoring Raisecom carrier/metro Ethernet switch (802.3ad LACP link aggregation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationTicketGenerationAlgorithm OID value, configure state conditions and alerts, and monitor any Raisecom carrier/metro Ethernet switch (802.3ad LACP link aggregation) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.6rcLinkAggregationRAISECOM-LINKAGGREGATION-MIB
1.3.6.1.4.1.8886.6.1.6.3rcLinkAggregationTicketGenerationAlgorithmRAISECOM-LINKAGGREGATION-MIB