All MIBs › RAISECOM-LINKAGGREGATION-MIB › rcLinkAggregationLoadSharingMode
rcLinkAggregationLoadSharingMode
Module: RAISECOM-LINKAGGREGATION-MIB
OID (symbolic): RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationLoadSharingMode
OID (numeric): 1.3.6.1.4.1.8886.6.1.6.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group to get the destination port. DestMAC (2), means the last three bits of the Destination MAC Address are used to index into the Trunk Group to get the destination port. SrcXORDestMAC (3), means that the last three bits of the Source MAC Address are logically XORed with the last three bits of the Destination MAC Address and used to index into the Trunk Group to get the destination port. SrcIP (4), means the last three bits of the Source IP Address are used to index into the Trunk Group to get the destination port. DestIP (5), means the last three bits of the Destination IP Address are used to index into the Trunk Group to get the destination port. SrcXORDestIP (6), means the last three bits of the Source IP Address are logically XORed with the last three bits of the Destination IP Address and used to index into the Trunk Group to get the destination port. This rule defines the distribution algorithm applied to the aggregated link.
What is rcLinkAggregationLoadSharingMode?
This object selects the hashing rule used to distribute traffic across the physical ports of a link aggregation trunk group, based on combinations of source/destination MAC or IP address bits, defaulting to srcXORDestMAC. Admins pick a mode that best spreads traffic evenly across the aggregated links given their traffic pattern, for example using srcIP/destIP-based hashing on a router-facing trunk versus MAC-based hashing on a switch-facing one. Setting this to srcXORDestIP(6) would balance load based on XORed source and destination IP address bits instead of the MAC-based default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.6.2 snmpwalk -v2c -c public <target> RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationLoadSharingMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.6.2.1 snmpget -v2c -c public <target> RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationLoadSharingMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.6.2.1 i <value>
Start monitoring Raisecom carrier/metro Ethernet switch (802.3ad LACP link aggregation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-LINKAGGREGATION-MIB::rcLinkAggregationLoadSharingMode OID value, configure state conditions and alerts, and monitor any Raisecom carrier/metro Ethernet switch (802.3ad LACP link aggregation) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.6 | rcLinkAggregation | RAISECOM-LINKAGGREGATION-MIB |
| 1.3.6.1.4.1.8886.6.1.6.2 | rcLinkAggregationLoadSharingMode | RAISECOM-LINKAGGREGATION-MIB |