All MIBs › RAISECOM-LBDETECT-MIB › rcLbDetectMode
rcLbDetectMode
Module: RAISECOM-LBDETECT-MIB
OID (symbolic): RAISECOM-LBDETECT-MIB::rcLbDetectMode
OID (numeric): 1.3.6.1.4.1.8886.6.1.50.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Mode choice of loopback detection.
What is rcLbDetectMode?
Selects whether loopback detection operates in port(1) mode, blocking whole ports on loop detection, or vlan(2) mode (the default), blocking only the affected VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.50.1.5 snmpwalk -v2c -c public <target> RAISECOM-LBDETECT-MIB::rcLbDetectMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.50.1.5.1 snmpget -v2c -c public <target> RAISECOM-LBDETECT-MIB::rcLbDetectMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.50.1.5.1 i <value>
Start monitoring Raisecom access switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-LBDETECT-MIB::rcLbDetectMode OID value, configure state conditions and alerts, and monitor any Raisecom access switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.50 | rcLbDetect | RAISECOM-LBDETECT-MIB |
| 1.3.6.1.4.1.8886.6.1.50.1 | rcLbDetectPktConfig | RAISECOM-LBDETECT-MIB |
| 1.3.6.1.4.1.8886.6.1.50.1.5 | rcLbDetectMode | RAISECOM-LBDETECT-MIB |