RADLAN-IPv6 :: rlInternInetStaticRouteForwardingStatus

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › RADLAN-IPv6 › rlInternInetStaticRouteForwardingStatus

rlInternInetStaticRouteForwardingStatus

Module: RADLAN-IPv6

OID (symbolic): RADLAN-IPv6::rlInternInetStaticRouteForwardingStatus

OID (numeric): 1.3.6.1.4.1.89.26.31.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is configured is down.

What is rlInternInetStaticRouteForwardingStatus?

This read-only object reports whether this internal static route is active(1), currently used in forwarding decisions, or inactive(2), meaning it's a backup route or down because its associated IP interface is not up. Admins check it the same way as the public static-route status object, but for internally generated static routes rather than user-configured ones. For example, rlInternInetStaticRouteForwardingStatus reading active(1) confirms this internally managed route is currently contributing to the device's forwarding table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.26.31.1.11
snmpwalk -v2c -c public <target> RADLAN-IPv6::rlInternInetStaticRouteForwardingStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.89.26.31.1.11.1
snmpget -v2c -c public <target> RADLAN-IPv6::rlInternInetStaticRouteForwardingStatus.1

Start monitoring Switching equipment built on RADLAN (Marvell) switch reference software (IPv6 addressing/neighbor discovery) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADLAN-IPv6::rlInternInetStaticRouteForwardingStatus OID value, configure state conditions and alerts, and monitor any Switching equipment built on RADLAN (Marvell) switch reference software (IPv6 addressing/neighbor discovery) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.89rndDell-MIB
1.3.6.1.4.1.89.26ipSpecDell-IP
1.3.6.1.4.1.89.26.31rlInternInetStaticRouteTableDell-IPv6
1.3.6.1.4.1.89.26.31.1rlInternInetStaticRouteEntryDell-IPv6
Numeric OIDNameModule
1.3.6.1.4.1.89.26.31.1.11rlInternInetStaticRouteForwardingStatusRADLAN-IPv6