All MIBs › RADLAN-IP › rsTftpRetryTimeOut
rsTftpRetryTimeOut
Module: RADLAN-IP
OID (symbolic): RADLAN-IP::rsTftpRetryTimeOut
OID (numeric): 1.3.6.1.4.1.89.26.5.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: General Retransmission time-out value (seconds)
What is rsTftpRetryTimeOut?
This configurable value sets the TFTP retransmission timeout in seconds for file transfers on Radlan IP devices. It determines how long the device waits for an acknowledgment before resending a TFTP packet. Operators adjust this on slow or unreliable networks to prevent unnecessary retransmissions or excessive timeouts during firmware and configuration downloads.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.26.5.1 snmpwalk -v2c -c public <target> RADLAN-IP::rsTftpRetryTimeOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.26.5.1.1 snmpget -v2c -c public <target> RADLAN-IP::rsTftpRetryTimeOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.26.5.1.1 i <value>
Start monitoring RADLAN/Marvell-based Layer 3 managed switches (extended IP interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADLAN-IP::rsTftpRetryTimeOut OID value, configure state conditions and alerts, and monitor any RADLAN/Marvell-based Layer 3 managed switches (extended IP interface configuration) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.26 | ipSpec | Dell-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.89.26.5 | tftp | RADLAN-IP |
| 1.3.6.1.4.1.89.26.5.1 | rsTftpRetryTimeOut | RADLAN-IP |