All MIBs › RADLAN-DHCPCL-MIB › rlDhcpClEnabledByDefaultRemovedIfIndex
rlDhcpClEnabledByDefaultRemovedIfIndex
Module: RADLAN-DHCPCL-MIB
OID (symbolic): RADLAN-DHCPCL-MIB::rlDhcpClEnabledByDefaultRemovedIfindex
OID (numeric): 1.3.6.1.4.1.89.76.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCP client entry. Otherwise (zero value) - the meaning is that DHCP client entry must be added.
What is rlDhcpClEnabledByDefaultRemovedIfIndex?
This read-only value is the ifIndex of a network interface whose DHCP client was enabled by default but has since been removed from the configuration by an administrator. It exists so the device can remember, per interface, that the user deliberately opted out of the default DHCP client behavior on that port rather than treating the absence as accidental. For instance, if a technician disables DHCP on interface 5 because it's wired to a static-IP server, this object would report 5 as the removed interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.76.16 snmpwalk -v2c -c public <target> RADLAN-DHCPCL-MIB::rlDhcpClEnabledByDefaultRemovedIfindex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.76.16.1 snmpget -v2c -c public <target> RADLAN-DHCPCL-MIB::rlDhcpClEnabledByDefaultRemovedIfindex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.76.16.1 i <value>
Start monitoring RADLAN/Marvell-based managed Ethernet switches (management-interface DHCP client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADLAN-DHCPCL-MIB::rlDhcpClEnabledByDefaultRemovedIfindex OID value, configure state conditions and alerts, and monitor any RADLAN/Marvell-based managed Ethernet switches (management-interface DHCP client) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.76 | rlDhcpCl | Dell-DHCPCL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.89.76.16 | rlDhcpClEnabledByDefaultRemovedIfIndex | RADLAN-DHCPCL-MIB |