All MIBs › QBSYS-SYSTEM-MIB › qbSysPortBwSharing
qbSysPortBwSharing
Module: QBSYS-SYSTEM-MIB
OID (symbolic): QBSYS-SYSTEM-MIB::qbSysPortBwSharing
OID (numeric): 1.3.6.1.4.1.4323.2.2.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object shows and controls the bandwidth allocation between Au-1 and au-2. If it is set to 622, then there is no port sharing enabled between the ports. Any other setting will enable port sharing, and the 622 Mbis/sec of bandwidth is split between the 2 ports. Note. If protection is being used, then the bandwidth should be set to 622.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4323.2.2.1.1.15 snmpwalk -v2c -c public <target> QBSYS-SYSTEM-MIB::qbSysPortBwSharing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4323.2.2.1.1.15.1 snmpget -v2c -c public <target> QBSYS-SYSTEM-MIB::qbSysPortBwSharing.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4323.2.2.1.1.15.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.4323 | quantumBridge | QUANTUMBRIDGE-REG |
| 1.3.6.1.4.1.4323.2 | qbMibs | QUANTUMBRIDGE-REG |
| 1.3.6.1.4.1.4323.2.2 | qbSysMIB | QBSYS-SYSTEM-MIB |
| 1.3.6.1.4.1.4323.2.2.1 | qbSysObjects | QBSYS-SYSTEM-MIB |
| 1.3.6.1.4.1.4323.2.2.1.1 | qbSysGeneralGroup | QBSYS-SYSTEM-MIB |
| 1.3.6.1.4.1.4323.2.2.1.1.15 | qbSysPortBwSharing | QBSYS-SYSTEM-MIB |