QB-VT15-MIB :: qbVTConfAction

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › QB-VT15-MIB › qbVTConfAction

qbVTConfAction

Module: QB-VT15-MIB

OID (symbolic): QB-VT15-MIB::qbVTConfAction

OID (numeric): 1.3.6.1.4.1.4323.2.9.1.3.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates whether the clock mode is set for a single tributary or group of tributaries. When set to 'singleVTAction(1)' a single selected tributary is set to a desired clock mode. When set to 'stsVTAction(2)' all tributaries that belongs to qbVTConfVTId's STS are set to a desired clock mode. When set to 'ifVTAction(3)' all qbVTConfIfIndex tributaries are set to a desired clock mode. For this mode the value of qbVTConfVTId is irrelevant. Thus any valid QbVT15VTId value can be used. When the value is set to 'noop', no operation is performed. When read, this object always returns the value noop(4).

What is qbVTConfAction?

Controls the scope over which a clock-mode change (qbVTConfClockMode) is applied: to a single selected tributary, to all tributaries in the same STS group, or to every tributary on the interface; reads back as noop and defaults to acting on a single tributary.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4323.2.9.1.3.1.4
snmpwalk -v2c -c public <target> QB-VT15-MIB::qbVTConfAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4323.2.9.1.3.1.4.1
snmpget -v2c -c public <target> QB-VT15-MIB::qbVTConfAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4323.2.9.1.3.1.4.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> qbVTConfAction.1

Start monitoring Quantum Bridge SONET/SDH access transport equipment (VT1.5/VC-12 conformance) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QB-VT15-MIB::qbVTConfAction OID value, configure state conditions and alerts, and monitor any Quantum Bridge SONET/SDH access transport equipment (VT1.5/VC-12 conformance) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4323quantumBridgeQUANTUMBRIDGE-REG
1.3.6.1.4.1.4323.2qbMibsQUANTUMBRIDGE-REG
Numeric OIDNameModule
1.3.6.1.4.1.4323.2.9qbVTVCMIBQB-VT15-MIB
1.3.6.1.4.1.4323.2.9.1qbVTVCTablesQB-VT15-MIB
1.3.6.1.4.1.4323.2.9.1.3qbVTConfTableQB-VT15-MIB
1.3.6.1.4.1.4323.2.9.1.3.1qbVTConfEntryQB-VT15-MIB
1.3.6.1.4.1.4323.2.9.1.3.1.4qbVTConfActionQB-VT15-MIB