QB-TIMING-MIB :: qbTimingPortCableLength

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › QB-TIMING-MIB › qbTimingPortCableLength

qbTimingPortCableLength

Module: QB-TIMING-MIB

OID (symbolic): QB-TIMING-MIB::qbTimingPortCableLength

OID (numeric): 1.3.6.1.4.1.4323.2.11.1.1.8.1.6

Node type: OBJECT-TYPE

Type: QbTimingCableLength

Access: read-write

Description: The object is used to set the range of cable from the OAS to the external synchronization source. The value entered is interpreted by the agent to have a cable length within the range associated with the value. Note: this value is applicable only for DS1 ports.

What is qbTimingPortCableLength?

This read-write object sets the estimated cable length, chosen from ranges spanning 0-110ft up to greater than 660ft, between the OAS system and the external synchronization source. The value applies only to ports configured in DS1 format, and the agent interprets the selected value as representing that length range rather than an exact distance. For example, an admin with a BITS clock located roughly 300 feet away would set qbTimingPortCableLength to length220to330ft(3) to match the actual cable run.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4323.2.11.1.1.8.1.6
snmpwalk -v2c -c public <target> QB-TIMING-MIB::qbTimingPortCableLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4323.2.11.1.1.8.1.6.1
snmpget -v2c -c public <target> QB-TIMING-MIB::qbTimingPortCableLength.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4323.2.11.1.1.8.1.6.1 s <value>

Start monitoring Quantum Bridge Inc. Optical Access System (OAS) platforms (network clock timing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QB-TIMING-MIB::qbTimingPortCableLength OID value, configure state conditions and alerts, and monitor any Quantum Bridge Inc. Optical Access System (OAS) platforms (network clock timing) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4323quantumBridgeQUANTUMBRIDGE-REG
1.3.6.1.4.1.4323.2qbMibsQUANTUMBRIDGE-REG
Numeric OIDNameModule
1.3.6.1.4.1.4323.2.11qbTimingMIBQB-TIMING-MIB
1.3.6.1.4.1.4323.2.11.1qbTimingObjectsQB-TIMING-MIB
1.3.6.1.4.1.4323.2.11.1.1qbTimingGroupQB-TIMING-MIB
1.3.6.1.4.1.4323.2.11.1.1.8qbTimingPortTableQB-TIMING-MIB
1.3.6.1.4.1.4323.2.11.1.1.8.1qbTimingPortEntryQB-TIMING-MIB
1.3.6.1.4.1.4323.2.11.1.1.8.1.6qbTimingPortCableLengthQB-TIMING-MIB