All MIBs › PW-TDM-MIB › pwTDMCfgPktReorder
pwTDMCfgPktReorder
Module: PW-TDM-MIB
OID (symbolic): PW-TDM-MIB::pwTDMCfgPktReorder
OID (numeric): 1.3.6.1.2.1.186.1.3.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-create
Description: If set to True: as CE-bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the range in which re-sequencing can occur) is dependant on the depth of the jitter buffer. See pwTDMCfgJtrBfrDepth.
NOTE: Some implementations may not support this feature. The agent should then reject a SET request for true.
What is pwTDMCfgPktReorder?
When set to true, out-of-order CE-bound packets held in the jitter buffer are re-sequenced rather than dropped, with the achievable re-ordering range limited by pwTDMCfgJtrBfrDepth; some implementations may reject a SET of true if they don't support it. Admins enable this on paths prone to packet reordering in the PSN to reduce unnecessary packet loss.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.186 | pwTDMMIB | PW-TDM-MIB |
| 1.3.6.1.2.1.186.1 | pwTDMObjects | PW-TDM-MIB |
| 1.3.6.1.2.1.186.1.3 | pwTDMCfgTable | PW-TDM-MIB |
| 1.3.6.1.2.1.186.1.3.1 | pwTDMCfgEntry | PW-TDM-MIB |
| 1.3.6.1.2.1.186.1.3.1.5 | pwTDMCfgPktReorder | PW-TDM-MIB |