All MIBs › PW-CEP-DRAFT04-MIB › pwVcCepSonetIfIndex
pwVcCepSonetIfIndex
Module: PW-CEP-DRAFT04-MIB
OID (symbolic): PW-CEP-DRAFT04-MIB::pwVcCepSonetIfIndex
OID (numeric): 1.3.6.1.4.1.99999.52.4.1.1.1.2
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-write
Description: This is a unique index within the ifTable. It represents the interface index for the SONET path for SPE emulation (RFC2558 section 3.3), an interface index for the SONET VT (RFC2558 section 3.4) if the VT to be emulated is extracted a SONET signal, or the ifIndex of the physical port emulated in VT mode if the VT to be emulated is directly feeded from a physical interface. It may represent an internal (virtual) interface if an NSP function exists between the physical interface and the emulation process.
A value of zero indicates an interface index that has yet to be determined. Once set, if the SONET ifIndex is (for some reason) later removed, the agent MAY delete the associated PW rows (e.g., this pwVcCep table entry). If the agent does not delete the rows, it is recommended that the agent set this object to zero.
What is pwVcCepSonetIfIndex?
Points (via ifTable index) to the SONET path, VT, or physical port interface this CEP pseudowire emulates; a value of zero means the interface hasn't been assigned yet, and per the spec if the underlying interface later disappears the agent may either delete this pseudowire's table row or reset this object back to zero.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.99999.52.4.1.1.1.2 snmpwalk -v2c -c public <target> PW-CEP-DRAFT04-MIB::pwVcCepSonetIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.99999.52.4.1.1.1.2.1 snmpget -v2c -c public <target> PW-CEP-DRAFT04-MIB::pwVcCepSonetIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.99999.52.4.1.1.1.2.1 s <value>
Start monitoring vendor-neutral, standards-based IETF PWE3 MIB (Circuit Emulation over Packet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PW-CEP-DRAFT04-MIB::pwVcCepSonetIfIndex OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based IETF PWE3 MIB (Circuit Emulation over Packet) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.99999 | iec624392 | IEC-62439-2-MIB |
| 1.3.6.1.4.1.99999.52 | pwStdMIB | PW-TC-DRAFT04-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.99999.52.4 | pwVcCepMIB | PW-CEP-DRAFT04-MIB |
| 1.3.6.1.4.1.99999.52.4.1 | pwVcCepObjects | PW-CEP-DRAFT04-MIB |
| 1.3.6.1.4.1.99999.52.4.1.1 | pwVcCepTable | PW-CEP-DRAFT04-MIB |
| 1.3.6.1.4.1.99999.52.4.1.1.1 | pwVcCepEntry | PW-CEP-DRAFT04-MIB |
| 1.3.6.1.4.1.99999.52.4.1.1.1.2 | pwVcCepSonetIfIndex | PW-CEP-DRAFT04-MIB |