PRVT-RING-EPS-MIB :: prvtRingEpsOperationalStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPRVT-RING-EPS-MIBprvtRingEpsOperationalStatus

prvtRingEpsOperationalStatus

Module: PRVT-RING-EPS-MIB

OID (symbolic): PRVT-RING-EPS-MIB::prvtRingEpsOperationalStatus

OID (numeric): 1.3.6.1.4.1.738.1.5.134.1.1.1.1.29

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: The purpose of this status is to identify to the user whether this instance is ready for running. The operational status can be up or down. When creating the instance the operational status will be down. Receiving CCMs from the expected peer MEPs on both ring ports will bring the operational status to up. If any needed CFM configuration is removed the operational status will go back to down

What is prvtRingEpsOperationalStatus?

This read-only boolean (default false) tells the admin whether this ring instance is actually ready to run: it starts down when the instance is created and only comes up once CCMs are being received from the expected peer MEPs on both ring ports. Admins check this before assuming a newly-configured ring instance is protecting traffic, since it stays down if required CFM configuration is missing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.5.134.1.1.1.1.29
snmpwalk -v2c -c public <target> PRVT-RING-EPS-MIB::prvtRingEpsOperationalStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.5.134.1.1.1.1.29.1
snmpget -v2c -c public <target> PRVT-RING-EPS-MIB::prvtRingEpsOperationalStatus.1

Start monitoring BATM Advanced Communication equipment (G.8032 Ring Ethernet Protection Switching) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-RING-EPS-MIB::prvtRingEpsOperationalStatus OID value, configure state conditions and alerts, and monitor any BATM Advanced Communication equipment (G.8032 Ring Ethernet Protection Switching) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.738privateVendorOIDPRIV-VENDORDEF-MIB
1.3.6.1.4.1.738.1prvt_productsPRVT-SWITCH-MIB
1.3.6.1.4.1.738.1.5switchPRVT-SWITCH-MIB
Numeric OIDNameModule
1.3.6.1.4.1.738.1.5.134prvtRingEpsMibPRVT-RING-EPS-MIB
1.3.6.1.4.1.738.1.5.134.1prvtRingEpsObjectsPRVT-RING-EPS-MIB
1.3.6.1.4.1.738.1.5.134.1.1prvtRingEpsInstancesPRVT-RING-EPS-MIB
1.3.6.1.4.1.738.1.5.134.1.1.1prvtRingEpsInstanceTablePRVT-RING-EPS-MIB
1.3.6.1.4.1.738.1.5.134.1.1.1.1prvtRingEpsInstanceEntryPRVT-RING-EPS-MIB
1.3.6.1.4.1.738.1.5.134.1.1.1.1.29prvtRingEpsOperationalStatusPRVT-RING-EPS-MIB