All MIBs › PROBE-MIB › trapDestDeliveryType
trapDestDeliveryType
Module: PROBE-MIB
OID (symbolic): PROBE-MIB::trapDestDeliveryType
OID (numeric): 1.3.6.1.4.1.11.2.13.1.3.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this object has the value one-shot(1), then the trap will be sent only once to the primary address without requiring acknowledgement. If this object has the value acknowleged(2), then the trap will be sent to the primary address expecting an acknowledgement. If the trap is not acknowledged within the time specified by trapMaxTimeOut, then the trap is retransmitted (with the same sequence number) to the primary address. The trap is retransmitted at most trapMaxRetries times until acknowledged. If the trap is still not acknowleged and the alternate address is not 0.0.0.0, then it is sent to the alternate address at most trapMaxRetries plus one times until acknowledged.
This object may not be modifed if the associated trapDestStatus object is equal to valid(1).
What is trapDestDeliveryType?
Controls how reliably a trap is delivered to this destination. Note: the SYNTAX in the source MIB only formally defines the value one-shot(1) (send once, no acknowledgement required), even though the accompanying DESCRIPTION text also discusses an acknowledged(2) retry-with-retransmit behavior that was apparently never fully implemented in this enumeration; in practice, expect only one-shot delivery to be usable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.13.1.3.3.1.3 snmpwalk -v2c -c public <target> PROBE-MIB::trapDestDeliveryType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.13.1.3.3.1.3.1 snmpget -v2c -c public <target> PROBE-MIB::trapDestDeliveryType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.13.1.3.3.1.3.1 i <value>
Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::trapDestDeliveryType OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.13 | snmp | HP-UNIX |
| 1.3.6.1.4.1.11.2.13.1 | trap | HP-UNIX |
| 1.3.6.1.4.1.11.2.13.1.3 | trapTest | JETDIRECT3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.13.1.3.3 | trapDestTable | PROBE-MIB |
| 1.3.6.1.4.1.11.2.13.1.3.3.1 | trapDestEntry | PROBE-MIB |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.3 | trapDestDeliveryType | PROBE-MIB |