PROBE-MIB :: serialTimeout

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PROBE-MIB › serialTimeout

serialTimeout

Module: PROBE-MIB

OID (symbolic): PROBE-MIB::serialTimeout

OID (numeric): 1.3.6.1.4.1.11.2.4.5.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This timeout value is used when the Management Station has initiated the conversation over the serial link. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface. Use the serialTrapTimeout in the case where the probe has initiated the connection for the purpose of sending a trap.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.4.5.1.1.7
snmpwalk -v2c -c public <target> PROBE-MIB::serialTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.4.5.1.1.7.1
snmpget -v2c -c public <target> PROBE-MIB::serialTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.4.5.1.1.7.1 i <value>

Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::serialTimeout OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.4interfaceHP-UNIX
Numeric OIDNameModule
1.3.6.1.4.1.11.2.4.5serialPROBE-MIB
1.3.6.1.4.1.11.2.4.5.1serialConfigTablePROBE-MIB
1.3.6.1.4.1.11.2.4.5.1.1serialConfigEntryPROBE-MIB
1.3.6.1.4.1.11.2.4.5.1.1.7serialTimeoutPROBE-MIB