serialSpeed

OID (symbolic): PROBE-MIB::serialSpeed

OID (numeric): 1.3.6.1.4.1.11.2.4.5.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The data rate to configure this serial interface to on startup as well as after each serial connection.

What is serialSpeed?

Sets the data rate (from 300bps up to 38400bps) the serial interface uses at startup and after each connection; an admin raises this to speed up serial-link management sessions if both ends support it (default 9600bps).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.4.5.1.1.6
snmpwalk -v2c -c public <target> PROBE-MIB::serialSpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.4.5.1.1.6.1
snmpget -v2c -c public <target> PROBE-MIB::serialSpeed.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.4.5.1.1.6.1 i <value>

Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::serialSpeed OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.4	interface	HP-UNIX

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.4.5	serial	PROBE-MIB
1.3.6.1.4.1.11.2.4.5.1	serialConfigTable	PROBE-MIB
1.3.6.1.4.1.11.2.4.5.1.1	serialConfigEntry	PROBE-MIB
1.3.6.1.4.1.11.2.4.5.1.1.6	serialSpeed	PROBE-MIB

PROBE-MIB :: serialSpeed

serialSpeed

Module

This MIB depends on