All MIBs › PROBE-MIB › probeEchoInterval
probeEchoInterval
Module: PROBE-MIB
OID (symbolic): PROBE-MIB::probeEchoInterval
OID (numeric): 1.3.6.1.4.1.11.2.3.7.6.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The probe will send an ICMP echo request (ping) to the default gateway every probeEchoInterval seconds. To force the probe not to send any echo requests, set probeEchoInterval to 0.
What is probeEchoInterval?
Sets how often, in seconds, the probe sends an ICMP ping to its default gateway to verify basic network reachability; setting it to 0 disables these periodic pings entirely (default 1800 seconds).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.1.10 snmpwalk -v2c -c public <target> PROBE-MIB::probeEchoInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.1.10.1 snmpget -v2c -c public <target> PROBE-MIB::probeEchoInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.6.1.1.10.1 i <value>
Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::probeEchoInterval OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.6 | lanprobe | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1 | general | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.1 | probeAdmin | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.10 | probeEchoInterval | PROBE-MIB |