All MIBs › PROBE-MIB › netConfigFramingType
netConfigFramingType
Module: PROBE-MIB
OID (symbolic): PROBE-MIB::netConfigFramingType
OID (numeric): 1.3.6.1.4.1.11.2.4.6.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Framing type. The choices for this field are: ESF - Extended Super Frame (24 frames/ESF). Valid for T1. D4 - Conventional Super Frame (12 frames/SF). Valid for T1. with CRC-4 - Cyclic Redundancy Check, 4 bits. Valid for E1. without CRC-4 - CRC not checked. Valid for E1. M13 - A DS-3 framing fromat. See C-Bit parity. Valid for T3. C-Bit Parity - The synchronous DS-3 C-Bit Parity is a structure that can be used to multiplex 28 DS-1 signals to the DS-3 signal level. In C-Bit Parity, the X-Bit channel is used to transmit failure conditions from the far end to the near end of a system. Valid for T3. G.832/G.804 - Valid with PLCP cell synchronization only. Valid for ATM E3. G.751 - Valid with HEC cell synchronization only. Valid for ATM E3. T1DM (DDS) - A.T&T. DDS Framing using D4 and time slot 24. Not Implemented at this time. SLIC-96 - Special version of D4 framing. Useds 4-D4 frames but changes some of the framing bits. Not Implemented at this time.
This field applies only to the T1, E1, T3/DS-3 WanProbes and DS-3 and E3 ATMProbes.
What is netConfigFramingType?
Selects the WAN framing format used on a T1/E1/T3/ATM interface (e.g. ESF, D4, or C-Bit Parity); this must match the carrier circuit's configuration or the probe will fail to frame-sync on the line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.4.6.1.1.12 snmpwalk -v2c -c public <target> PROBE-MIB::netConfigFramingType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.4.6.1.1.12.1 snmpget -v2c -c public <target> PROBE-MIB::netConfigFramingType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.4.6.1.1.12.1 i <value>
Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::netConfigFramingType OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.4 | interface | HP-UNIX |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.4.6 | net | PROBE-MIB |
| 1.3.6.1.4.1.11.2.4.6.1 | netConfigTable | PROBE-MIB |
| 1.3.6.1.4.1.11.2.4.6.1.1 | netConfigEntry | PROBE-MIB |
| 1.3.6.1.4.1.11.2.4.6.1.1.12 | netConfigFramingType | PROBE-MIB |