All MIBs › PROBE-MIB › echoTestPeriodicRespondedEventIndex
echoTestPeriodicRespondedEventIndex
Module: PROBE-MIB
OID (symbolic): PROBE-MIB::echoTestPeriodicRespondedEventIndex
OID (numeric): 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The index of the eventEntry in the RMON MIB that is used whenever the value of echoTestPeriodicLastEchoStatus changes from response_timed_out(3) to response_received(2). The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index.
What is echoTestPeriodicRespondedEventIndex?
Points to the RMON eventEntry that fires when this periodic test recovers, transitioning from timed-out back to response-received; zero means no notification is generated for recovery, letting an admin wire up a trap for a host coming back online.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.9 snmpwalk -v2c -c public <target> PROBE-MIB::echoTestPeriodicRespondedEventIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.9.1 snmpget -v2c -c public <target> PROBE-MIB::echoTestPeriodicRespondedEventIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.9.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> echoTestPeriodicRespondedEventIndex.1
Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::echoTestPeriodicRespondedEventIndex OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.6 | lanprobe | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1 | general | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.6 | echoTest | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2 | echoTestPeriodicTable | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1 | echoTestPeriodicEntry | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.9 | echoTestPeriodicRespondedEventIndex | PROBE-MIB |